HyperBeautynz
DIY Tooth Gem Kit
DIY Tooth Gem Kit
Couldn't load pickup availability
With our Hyper Beauty DIY Tooth Gem kit you can create your very own unique look in the comfort of your own home while saving money. This kit is also used by Professional and at home use. Get upto 50 applications in just 1 kit!! Instead of paying $100+ for just 1 tooth gem in stores!! More for your buck, And did I mention that this is the best tooth gem kit on the market??? WELL IT IS!!!
WHATS INCLUDED IN THIS KIT
- 1x UV light (Batteries Not Included)
- 1 x Adhesive paste Syringes (3.5g)
- 1 x Primer Bottle (3mls)
- 1 x Etching gel (2.5mls)
- 1 x Double Ended Mixing Spatulas
- 1x Dental mouth opener
- 1 x Diamond pen ( for picking up gems)
- 1 x Wax pen (for picking up gems)
- 10x Micro brush
- 5x Cotton rolls
- 1x container of tooth gems (Mixed colours)
STEP BY STEP APPLICATION
Place the Dental mouth opener in mouth for easier application.
Make sure to dry teeth using the cotton roll.
Apply the Etchant gel on teeth and wait 2 mins.
Clean the etchant gel from teeth using the cotton rolls, clean until teeth are dry.
Apply Primer using the micro brush (Pink tool) then cure using the UV light for about 5 sec.
Apply UV Resin (use the same amount of resin as the size of the gem you are using)
TIPS: Make sure tooth is dry before placing gem!! It is best to place the resin on the gem first then place on teeth
Using the UV light cure the resin for about about 1-3 mins.
FREQUENTLY ASKED QUESTIONS
HOW LONG WILL THE TOOTH JEWEL LAST?
Anywhere from 6 months up to 24 months for the Swarovski Crystals, and Shaped Crystals, and 6 to 12 Months for the Real Gold Charms & Real Diamonds (Due to the extra Weight on these Specific Charms). With extra care, they may last even longer.
CAN I FEEL THE JEWEL ON MY TOOTH?
The jewels are only 0.4mm or 0.9mm thick and 1.8mm to 3mm in diameter. Initially, something on your tooth will feel different, but a few days after the application, you will get used to the new feeling.
WILL THE JEWEL HARM MY TOOTH?
No! The jewel will bond to the enamel, like an orthodontic bracket, without any drilling or pain. The procedure and removal is similar to the placement and removal of orthodontic brackets. When it is removed, the gem/charm is simply popped off and the tooth will be polished to remove any remaining bonding material.
I HAVE VENEERS/A FALSE TOOTH, CAN I STILL GET CHARMED?
Unfortunately, the bonding agent will only attach to natural tooth.
I HAVE A GEM/BOND ON MY TOOTH CURRENTLY. CAN YOU REMOVE IT?
Unfortunately, I cannot remove crystals/bond at the time of your service; a dentist must do it before you arrive. Your tooth must be free of previous crystals/bond at the time of service. The bonding agent will not attach to existing bond.
DOES THE JEWEL IMPEDE BRUSHING?
No, the presence of the tooth jewellery will not make any difference regarding dental hygiene. However, it is recommended not to use an electric toothbrush.
HOW LONG DOES THE PROCEDURE TAKE?
That all depends on the design you are going for. Usually, one basic Gem application takes no longer than 5 - 10 minutes.
WHAT IF THE JEWEL FALLS OFF AND I SWALLOW IT?
The jewels are tiny glass crystals or gold. They have no sharp edges. It will come out "the natural way".
CAN I STILL HAVE MY TEETH CLEANED BY MY DENTIST/HYGENIST?
Yes, you can and should still have your teeth cleaned by a professional. Tooth jewellery will not cause a problem for the hygienist cleaning your teeth. The area underneath the jewel is sealed like a filling and will not let in any bacteria. The hygienist can easily polish on top and around the gemstone with a soft point.
CAN I STILL WEAR MY RETAINER/INVISALIGN?
For a retainer, it depends on the type. If it is a Hawley Retainer (the wire kind), yes! Just bring it to your appointment and can make sure the placement of the gems doesn’t interfere with it. Unfortunately, if you have the clear plastic tray type (this also applies to Invisalign), it will put too much pressure on your tooth and the gem, so it’s not some
Application
Application
STEP 1
Use the applicator to grab one of the lash pieces (don’t grab by band) Apply a coat of the lash bond under natural lashes or on the band of the lash piece.
STEP 2
Lift your eyelid up with one hand and with the other hand holding the applicator with the lash piece and slowly place the lash piece under your natural lashes hold till the lash stays in place.
STEP 3
Keep applying lash pieces under natural lashes until satisfied, if you want thicker looking lashes apply another layer of lashes.
STEP 4
Now taking the lash applicator, pinch together your natural lashes and the lash pieces together and repeat the same steps on the other eye.
STEP 5
Once you have applied the lash pieces, apply the lash seal to secure the lashes in place then wait to dry.
NOTE: If you find the lashes isn't sticking to your natural lashes, place a little more bond on the spine of the lash.
Ingredients
Ingredients
2in1 Lash Bond & Lash Sealant
- WATER (AQUA), ACRYLASTES/ETHYLHEXYL ACRYLATE COPOLYMER, PROPYLENE GLYCOL, PEHNOXYETHANOLE/ETHYLHEXYL GLYCERIN & OCTANOL/ETHYL GLYCEROL.
DIY Lashes
- 100% VEGAN KOREAN SYNTHETIC FIBER
Shipping
Shipping
We offer overnight delivery NZ-wide!
